| Why I bought a new tripod: I already own an old garage-sale tripod of some unspecified brand that I've used with my video camera for several years. In retrospect, I took its stability for granted, but it lacked a few of the conviences typically found on current tripods. It folds up nicely, but is heavier to carry than current models, and the camera must be unscrewed from the base plate to remove it from the tripod. Having bought my first high quality digital still camera, I wanted a lighter-to-carry tripod and one that allowed quick removal and replacement of the camera. Why I chose this one: This unit offered good height, light weight, a "fluid head" for smooth pans with the video camera, a snap-in base plate, and a carry bag - all at a great price. Why I'm returning this one:
Least reason: The base plate attaches to the camera using a built in plastic tab attached to the screw. While this is a convenient idea, the tab must be folded down flat to get the base to lock onto the tripod. Not so bad until you want to remove the plate - you may need a screwdriver to pry up the tab or risk losing a fingernail. The screw itself does not have slots for a screwdriver. Most reason: The stability I took for granted in my old tripod is lacking in the new one. Specifically: 1.The legs flex. On a vinyl floor, it was difficult to get a stable stance because the extended legs woud, one-by-one, flex and "dance" across the floor. On less-slick surfaces the feet stayed in place, but there was still movement in the unit. 2.The top pole (that raises with the crank) is shaky when extended. The idea of the "fluid head" for smooth pans seems lost when touching the camera causes considerable wobble in the bar itself. The top pole is better left down. (Yes, I tightend the connections.) 3.The bars of the center brace are attached by loose-fitting rivets. The brace may prevent the unit from collapsing should you need to set the legs at a narrower stance, but it does little to "solidify" the tripod. Summary: At full height, it was difficult to take even still pictures without movement in the tripod. The setup may look stable, but then you have to touch the camera (unless you have a remote). It`s worse with the video camera - I was unable to get a smooth pan in spite of the "fluid head". Stability is better at half-height. | .jpg)
